Surcharge Notice: The prices on this website include any material surcharges in effect at the time of the order.

Store Front  »  Portable Conveyor  »  Model PC  »  Specifications

Model PC Portable Parts Conveyor

OVERALL VIEW
Overall View
SECTION "X-X"

Section "X-X"


BELT - 3-ply black Nitrile with 1-1/2 in. high molded cleats on 12 in. centers. Clipper unibar lacing.

BED - 6-5/8 in. deep x 12 ga. powder painted formed steel slider bed. 3-1/2 in. high vertical sides with rolled edge. Standard sections are 4 ft., 6ft., 8ft., 10ft., and 12ft. long. Longer bed sections are bolted together with splice plates and joints support angles.

PORTABLE BASE SUPPORT - Tubular steel support mounted on 4 in. dia. steel wheels. Adjustable to control conveyor height at top and bottom. Adjustment height can be locked in place with lever. NOTE: Not available on units longer than 13 ft.

OVERHEAD END DRIVE - Motor reducer unit mounted 9-1/2 in. above belt (chain guard RH side).

DRIVE PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings, machine crowned and fully lagged.

BELT RETURN - 4 in. dia. with 1 in. dia. shaft at bearings, machine crowned.

TAKE-UP
- Take-ups provided at tail pulley. Provides 4 in. of belt take-up.

BEARINGS
- Sealed, pre-lubricated, self-aligning, ball bearings on drive and tail pulleys.

SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley.

MOTOR - 1/2 HP - 230/460V - 3 Ph. 60 Hz. Totally Enclosed C-Face.

BELT SPEED - Constant 65 FPM.

CAPACITY - 300 lbs. total distributed load at 65 FPM.


FEEDER SHOWN WITH OPTIONAL PC TYPE GUARD RAIL,
GRAVITY BRACKET WITH POP-OUT ROLLER AND MS TYPE FLOOR SUPPORTS